Need help?Do you have a question about the VEMAG ROBOT HP10C and is the answer not in the manual?
Defines the intended use and scope of the vacuum filler machine.
Details the correct and intended applications and operational conditions for the vacuum filler.
Provides essential safety guidelines for operating and working with the vacuum filler.
Outlines specific safety precautions and warnings for critical operations and machine parts.
Provides an illustrated overview of the main components and parts of the vacuum filler machine.
Provides instructions and safety warnings for safely moving and transporting the vacuum filler.
Details how to level and position the machine correctly on its feet.
Outlines the safety requirements and procedure for connecting the machine electrically.
General advice on selecting and preparing components for setting up the machine.
Instructions for correctly installing the all-in-one or two-part double screw housing.
Details the procedure for inserting and aligning the double screws into the housing.
Step-by-step guide on starting production, including safety checks and product loading.
General guidelines for daily cleaning of the machine and its components.
Procedures for disassembling various machine parts for thorough cleaning.
General instructions for cleaning the main machine body and components.
Overview of maintenance requirements, service contracts, and safety during maintenance.
A detailed schedule of maintenance tasks based on operating hours and intervals.
Daily tasks required to maintain the machine's optimal performance.
Weekly tasks for maintaining the machine's operational integrity.
Monthly tasks for machine upkeep and component checks.
Quarterly maintenance tasks for key machine components.
Quarterly maintenance for the vacuum pump, including oil, screens, and valve cleaning.
Maintenance tasks to be performed every six months.
Annual tasks for maintaining the machine's long-term reliability.
Annual oil change and filter cartridge replacement for the hydraulic drive.
Maintenance tasks to be performed every two years.
A table listing common faults, their causes, and recommended remedies.
General| Category | Industrial Equipment |
|---|---|
| Manufacturer | VEMAG |
| Model | ROBOT HP10C |
| Payload Capacity | 10 kg |
| Axes | 6 |
| Protection Class | IP54 |
| Type | Robotic arm |
| Power Supply | 50/60 Hz |
To Next Page
