VENOM STRIKE - Operating Procedures

OPERATING PROCEDURES
OPERATING PROCEDURES
Pre-Operation Safety
& Performance Inspection
Use the pre-operation checklist to inspect the operational conditions and
performance of the vehicle. If bad operational conditions are found on
a vehicle, stop operations. Removal from operation can prevent further
damage to the vehicle or serious injuries. If the vehicle is not in an operate-
able condition, inquire your dealer for maintenance or repairs.
PRE-OPERATION CHECKLIST
INSPECTION ITEMS INSPECTION PROCEDURES
Battery
Before initially using vehicle, the batteries should be fully
charged.
Brake
Check the brake pedal. When it is stepped on, it should be
exible and feel rm. It should return to its original position
with exibility when released.
Accelerator Pedal
Check the accelerator pedal. When it is stepped on and
released, it should return to its original position with full
exibility
Tires
Check the tires' pressure. Pressure should be around 20
psi. Check the tires' surface, remove any embedded objects
you can nd. Be sure there are no cracks or other damage
to the tires. Defective tires may cause an accident while
driving.
Steering
Pull the steering wheel up and down, check the tightness of
steering wheel. Rotate the steering wheel right and left. Be
sure no excessive free play is felt or rattling heard.
Reverse Warning
Beeper
Check the reverse beeper, when the direction selecting
switch is toggled downward, the reverse gear is engaged,
and a beep should be heard.
Lights
Check the signal lights, the brake lights, and turning lights
should be in proper working condition.
11
VENOM-EV.COM Venom EV User Guide