OPERATING PROCEDURES | CHARGER
System Power-On & Power-Off Procedures
Power-on procedure:
Press the vehicle power button located on the dash of your vehicle. After a
brief pause, you may hear the “click” of the batteries waking up. Next, place
the key into the ignition switch and turn the key forward (away from the
driver). Your screen and cart should then power on and be ready to operate.
Power-off procedure:
Turn the vehicle key into the off position. You can eject the power button,
located on the dash of your cart. Turning the power button off will disconnect
the relay switch, and your cart will not operate until the power button is
inserted again.
▪ Only use the charger that came at the time of purchase with your cart, that
matches your model. Contact an authorized Venom dealer to obtain or
replace parts.
▪ It is recommended to have an extinguishing device where you are storing
or charging your cart, to safely respond to extreme circumstances.
extinguishing devices around it so that emergency fire extinguishing
treatment can be carried out in extreme circumstances.
Charger Maintenance
WARNING!
IF THE PLUG PINS ARE BENT, SPEAK WITH YOUR LOCAL DEALER FOR REPLACING.
DO NOT TRY TO REPAIR THE AC CORD PLUG OR PINS.
Cracks
Cuts
Frayed Wiring
Insulation Damage
Loose Connections
Splices
Bent Pins
Corrosion
Cracks
Loose Connections
Missing Pins
Electrical Cords
Examine electrical cords for
wear and damage before use.
Immediately replace electrical
cords for:
Electrical Plugs & Receptacles
ELECTRICAL PLUGS AND
RECEPTACLES Examine electrical
plugs for wear and damage
before use. Immediately replace
electrical plugs for:
17
VENOM-EV.COM Venom EV User Guide
To Next Page
Loading...
