13
2.19 FUNCTION / M_RES (MODEL RESET)
Model Reset feature is used to reset a specic model memory slot back to factory
default settings.
1) Press ENTER to see the FUNCTION MENU.
2) Use the +/- Keys to select the M_RES function and press ENTER.
3) Use the +/- Keys to select YES.
4) Press ENTER twice to reset the data.
5) Press EXIT TWICE to save and return to the FUNCTION menu.
2.20 FUNCTION / TIMER
Use the timer to monitor your race, lap times or test session. By default the Timer is
set to the INH (Inactive) Mode. Use the +/- Keys to set the mode to UP_T or DN_T to
activate the timer function. The UP_T setting will count up from zero to a user set time
limit or a maximum of 99 minutes 30 seconds. The DN_T setting will count down to zero
from a user set time limit or a maximum of 99 minutes 30 seconds. The timer will start
on the rst pull of the Throttle Trigger and will stop when full brakes are applied.
1) Press ENTER to see the FUNCTION MENU.
2) Use the +/- KEYS to highlight TIMER and press ENTER
3) Press ENTER to scroll through INH, UP_T and DN_T.
4) Press ENTER to set the timer in 30sec increments. Maximum time limit is 99 min, 30
sec.
5) Press EXIT to save and return to the FUNCTION MENU, press EXIT again to return
to the Main Screen.
To Next Page
Loading...
Need help?
General