3
Step 1 - Power O Current System
1) Go to your home’s circuit breaker panel
and switch the furnace and air conditioner
breakers o.
2) To confirm power is o, adjust the
temperature on your current thermostat.
If the system does not respond
accordingly, power has probably been
successfully shut o.
WARNING: Failure to follow this step can result in personal
injury and/or death from shock and electrocution.
Step 2 - Remove Faceplate
Remove the faceplate of current system. Most faceplates snap-o or
feature small screws that will need to be removed.
WARNING: If you see large thick
electrical wires, wire nuts, or if your
system is labeled 120V or 240V DO
NOT PROCEED. THIS THERMOSTAT
IS NOT COMPATIBLE WITH THESE
SYSTEMS
WARNING: Failure to follow this step
can result in personal injury and/or
death from shock and electrocution.
To Next Page
Loading...
