Vent-Axia MULTIVENT MV350 - User Manual

Installation and Wiring Instructions
Installation et raccordement électrique
Anweisungen zur Installation und Verkabelung
MV250 181510A 220-240V AC 50Hz 80W MV350 181010A 220-240V AC 50Hz 100W
MULTIVENT
Ventilation systems
Ventilateurs
Ventilatoren
453653 C 0600
Head Office: Fleming Way, Crawley, West Sussex RH10 2NN, England.
Tel: +44 1293 526062 Fax: +44 1293 551188
Internet site at: www.vent-axia.com email: info@vent-axia.com
Fig./Abb. 6

Summary

Vent-Axia Multivent Extractor Fans Installation Instructions

Introduction

Overview of the MULTIVENT ventilation system and its capabilities for multiple areas.

General Safety Notes

Crucial safety precautions for installation and operation to prevent hazards and ensure compliance.

Multivent Installation

Detailed steps for installing the MULTIVENT unit, including siting and physical setup.

Siting

Guidance on selecting the correct location and mounting orientations for the MULTIVENT unit.

Installation Steps

Procedures for positioning, securing the unit, and connecting ducting and condensate drainage.

Wiring Instructions

Instructions for mains supply connection, speed selection, and wiring diagrams.

Over-heating Protection

Information on the fan motor's thermal overload protection and troubleshooting.

Vent-Axia Sales Centres and Guarantee

England & Wales National Call Centre

Contact information for the national call centre in England and Wales.

Scotland Sales Centre

Address and telephone number for the Vent-Axia Scotland sales centre.

Northern Ireland Sales Centre

Contact details for the Vent-Axia Northern Ireland sales centre.

Republic of Ireland Sales Centre

Details for Vent-Axia Ventilation Ltd. in the Republic of Ireland.

The Vent-Axia Guarantee

Details of the product guarantee, terms, and conditions for claims.

Vent-Axia MULTIVENT MV350 Specifications

General

Type	Centrifugal fan
Airflow	350 m³/h
Voltage	230 V
Frequency	50 Hz
Mounting	Wall or ceiling
Control	Manual or automatic
Diameter	150 mm