NOTE: Do not ins
t
all the spa on carpet or other material that can be damaged by moisture.
d) Outdoors installation:
1. No matter where you install the spa, it is important you have a solid support foundation.
If
you are
installing the spa ou
t
doors
,
ensure there are no sharp objects that could damage
it and that the location is level so the spa si
t
s stably and properly
.
2
.
During
f
illing
,
emp
t
ying or when in use
,
water may spill ou
t
o
f
the spa. The spa should be installed
near a ground drain.
3. Do no
t
leave the spa’s surface exposed to direct sunlight for long periods o
f
time.
C Assembly
1. Unfold the spa from the packaging. Spread the spa and cover
.
Make sure both are right side up.
2. Open the air outle
t
on the spa. Screw one end of the inflation hose onto it.
3. Open the air valve on the spa. Connect the other end of inflation hose into the valve.
To Next Page
Loading...
