A Ensure to c heck all parts are present :
d. Fil
t
er cartridge and fabric cover
e.
f.
Repair kit
Ground clo th
WARNING1: The floor has to be c apable of supporting the expected load
.
WARNING2: An adequat e drainage system has to be provided to deal with overflow water
.
IMPORTANT: Because of the combined weight of the spa, water
,
and users, it is extremely important that
the base where the spa is installed is smooth, flat, level and capable of uniformly suppor ting this weight
for the entire time the spa is installed.
If
the spa is placed on a surface, which
does not meet these requir emen
t
s
,
any damage c aused by improper s upport will void the w arranty
. It
is the
responsibility o
f t
he spa owner
t
o assure the integri
t
y of the site at all times.
Be aware of special requ irements i
f
you install the spa indoors
.
1. The floor must be able to withstand the capacity of the spa. The floor should be a non-slip
,
level surf ace.
2. Proper drainage is essential for i ndoor spa installation
.
When building a new room for
t
he spa i
t
is
recommended
t
ha t a floor dr ain be installed.
3. Humidity is a nat ural side effect of spa installation. Determine the effec
t
s of airborne moisture
on exposed wood, pape r
,
etc. in the propos ed location. To minimize t hese
effects i
t
is bes t to provide plenty of ventilation to the selected area. An architect can help determine i
f
more ve ntilation is needed.
To Next Page
Loading...
