“bubble” button first
,
and
t
hen operate according to s
t
ep 2-5 above.
Attention 3: Make sure the bottom spray pipe is flat before you use bubble function, the air bubble cannot come out from
the bottom pipe if the pipe stuck together.
5. Remove
t
he inflation hose and screw the valve tight.
6. Remove
t
he inflation hose from the air outlet and screw the nut tight.
7. Screw the filter cartridge onto the water inlet on the spa wall by turning it clockwise.
Attention : To prevent the small parts entering the control box caused by blocking. Please always install the filter
cartridge when using spa.
8
.
Fill the spa using a garden hose to fill to the water level printed on
t
he spa wall.
9. Place the cover onto
t
he spa, fasten the zipper
.
8 9
7
To Next Page
Loading...
