HEATER Key - On-of
f
key for the heating system. Press this key the heating system will start
working and the red indicator lamp will be on. Press again and the heating system will stop working and
t
he lamp
will be of
f.
When pressing down the key ‘HEATER’, the heating system will start working and
t
he red indicator lamp will be
on. A
t
the same time, the red indicator lamp of the key FILTER will also be on and
t
he fil
t
er pump will start working, too.
This is a normal phenomenon required by the design.
When the prese
t t
empera
t
ure has been reached
, t
he heating system will stop working while the heating indicator lamp will
no
t
turn of
f.
The fil
t
er pump will stop working and
t
he fil
t
ration indicator lamp will be o
ff.
When the wa
t
er temperature falls
to 2 below the preset temperature, the heating system will start working automatically and so
will the filter pump. The filtration indicator lamp will be on.
TEMPERATURE Key – Key for setting
t
emperature. Press this key and the numbers on the
display screen will star
t
flashing, and the keys for increasing or decreasing temperatures can be pressed to set
the temperature. When se
tt
ings are finished, press the TEMPERATURE Key again
t
o confirm
.
Defaul
t
temperature
is 40°C, and temperature can be set in the range of 20-42°C.
------ Key for increasing temperature
------ Key for decreasing temperature
To Next Page
Loading...
