Ventrac MK960 - Specifications; Dimensions; Features

Specications - 25
SPECIFICATIONS
Dimensions
Overall Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-1/2 inches (49.5 cm)
Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 inches (155 cm)
Overall Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 inches (244 cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .580 pounds (263 kg)
Cutting Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 inches (241 cm)
Cutting Height Range . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 5 inches (25 - 127 mm)
Cutting Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Features
Flip up deck design
Three front anti-scalp rollers
Full length rear roller for even cutting and striping
Visit ventrac.com/manuals
for the latest version of this
operator’s manual.
A downloadable parts
manual is also available.
View all manuals