MEMORY Read maximum/minimum records Clear memory record
HEAT INDEX/ Read Heat Index & Dew Point
DEW POINT
CLOCK Read time, calendar and day-of-week Set Clock & Calendar
ALARM Read alarm time; enable/disable alarm Alarm time setting
▲ UP 1 step forward in setting Fast advance
▼ Down 1 step backward in setting Fast backward
SNOOZE/LIGHT Trigger snooze alarm & extend backlight
WIND ALARM
Enable/disable high gust wind alarm
& low wind chill alarm
WIND UNIT Toggle wind speed unit between
Beaufort, mph, m/s, km/h & knot
RAIN UNIT Toggle between mm & inch rainfall unit
Search for Radio-Controlled time
ZONE Toggle RC time & Zone time Zone time setting
C/F Toggle degree C & F unit
CONNECTING WITH REMOTE SENSORS
The weather station uses 433MHz radio signals to send and receive weather data between the
monitors and remote sensors.
After battery/adapter installation, the monitor will automatically search for remote sensors.
You can also enforce a searching mode by holding “CHANNEL/SEARCH” on the monitor.
Follow the instruction in the “INSTALLATION” section to set up the sensors and wireless connection. If
the connection cannot be established, reset the remote sensor by removing the batteries from the
sensor. Wait for 10 seconds and reinstall the batteries. Then hold “CHANNEL/SEARCH” on the monitor
To Next Page
Loading...
