EasyManua.ls Logo

VER-MAC ST-4815G3 - Equipment Inspection Procedures; Pre-Installation Inspection Checklist

VER-MAC ST-4815G3
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
How to Use this Manual
Ver-Mac 2019 Arrowboard Operation, Safety and Maintenance Manual –v1 1
2 Overview
This manual is an owner’s and operator’s guide to the safe operation and maintenance of all
models of Ver-Mac arrowboards.
Ver-Mac’s trailer and vehicle-mounted arrowboards provide warning and directional information
to assist drivers through or around a temporary traffic control zone. They are designed for quick
installation, low maintenance and simplicity of operation. Depending on the model, they operate
on battery power alone or solar-assisted battery power.
All 15-lamp arrowboards can operate in one of four modes: left/right arrow, double arrow,
caution bar and 4-corner flash (optional).
All 25-lamp arrowboards can operate in one of seven modes: left/right arrow, double arrow,
caution bar, chevron, sequential arrow, sequential diamonds and 4-corner flash (optional).
2.1 How to Use this Manual
This manual is made for the trailer-mounted Ver-Mac arrowboards as follows:
Within your model section, it is divided into 5 main parts:
Walk-around inspection checklist
Setup and takedown procedure
Maintenance
A complete maintenance schedule table
A list of all the safety stickers on the arrow
The optional V-Touch AB controller features are described in detail at the end of this manual.
2.2 Ver-Mac Arrowboard Models Table
This table will help you determine which Ver-Mac arrowboard you are using.
Type
No. Lamps
Model
Energy
Panel in inches (cm)
Trailer-Mounted
on mast
15
ST-4815G3
Solar and batteries
48 x 96 (122 x 244)
25
ST-4825G3*

Table of Contents