Verdant VX-TW - Mounting the Thermostat to the Wall

11
Verdant VX-TW Network Installation
Installing Thermostats
6. Mounting the thermostat to the wall;
6.1. Remove the thermostat cover;
6.2. Use the supplied wall anchors and mounting screws to secure the
thermostat to the wall;
6.3. Insert two (2) C-cell batteries (not supplied) into the thermostat
battery compartment;
6.4. Follow the “Thermostat Configuration” instructions to correctly
configure the thermostat.
6.5. Replace the thermostat cover and screw in the fixing screw;