Verint S5020BX-DN User Manual

All users should read the related user manuals for complete details on installation, usage and functionality.
Quick Installation Guide
S5000 Series - BX Models
Version 1.0
Nextiva
1
Hardware Overview
The Nextiva S5000BX is available in two models S5003BX-DN and S5020BX-DN. The S5003BX-DN
features a VGA sensor and the S5020BX-DN features a 2-Megapixel sensor.
Lens are not included with the camera, but Verint offers multiple lenses that are available for purchase. If
you choose to purchase a lens elsewhere, ensure it has the following characteristics:
 Aspherical
 CS mount, 1/3 inch format
 Manual or DC auto iris
 Day/Night support
Light Sensor
Built-in
Microphone
SD/SDHC
Card Slot
Audio/Video out,
1/8in (3.5mm) jack
Status LEDs
External
Microphone In
12V DC
Power Cord
Connector
NTSC/PAL
Switch
External/Internal
Mic Switch
RJ-45 Network
Connector
DC-Iris Control
Cable Connector
Hardware Reset
Button
12V DC Output
Relay Output
Dry Contact Input
Ground
24V AC Input
RS-485 +
RS-485 -
Focus Controller*
Zoom Controller*
Auto Iris Cable
Front View Rear View
*The position of the zoom and focus controllers will vary depending on
the lens manufacturer.

Verint S5020BX-DN Specifications

General

Model	S5020BX-DN
Category	IP Camera
Form Factor	Bullet
Focal Length	2.8 - 12 mm
Aperture	F1.4
Network Interface	10/100 Mbps Ethernet
Power Supply	12V DC
Ingress Protection	IP66
Weather Resistance	Yes
IR Range	Up to 30 m (98 ft)
Resolution	1920x1080 (Full HD)
Minimum Illumination	0.01 Lux
Day/Night	Yes
Video Compression	H.264
Frame Rate	30 fps
Power over Ethernet	PoE (802.3af)
Sensor Type	1/2.8" progressive scan CMOS