Need help?Do you have a question about the Verint nextiva V4320 series and is the answer not in the manual?
General| Maximum Resolution | 1920 x 1080 |
|---|---|
| Maximum Frame Rate | 30 fps |
| Day/Night | Yes |
| Video Compression | H.264, MJPEG |
| Ingress Protection | IP66 |
| Minimum Illumination | 0.01 lux (color), 0 lux (B/W with IR) |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| IR Illuminators | Yes |
| Audio Compression | G.711 |
| Protocols | HTTP, HTTPS, TCP, UDP, RTSP, RTP, RTCP, IGMP, ICMP, DHCP, DNS, DDNS, NTP, FTP, SMTP, SNMP, UPnP |
| Operating Temperature | -22°F to 140°F (-30°C to 60°C) |
| Power | PoE (IEEE 802.3af) |
| Network Interface | 10/100 Base-T Ethernet |
| IR Cut Filter | Removable IR cut filter for true day/night operation |
Essential precautions to reduce the risk of injury and equipment damage.
Instructions for connecting power sources (AC, DC) to the FDW-DN model.
Guide on powering the camera using an 802.3at PoE injector.
Explains DHCP and static IP address settings for network connectivity.
How to access the camera's web interface and view live video streams.
Configuration of general device settings like host name, time zone, and time synchronization.
Setting video resolution, frame rate, text overlays, and rotation types.
Configuring video compression settings and selecting the OCX protocol for streaming.
Adjusting camera exposure and white balance for optimal image capture in different lighting.
Fine-tuning image parameters like brightness, sharpness, contrast, saturation, and hue.
Creating and managing user accounts with specific access privileges for the camera.
Setting up secure HTTPS connections using self-signed or CA-signed certificates.
Configuring motion detection parameters, sensitivity, and triggered actions.
Instructions for formatting the micro SD card for video recording.
To Next Page
