Verint nextiva V4320 series User Manual

Adjusting the Digital Zoom
► To adjust the digital zoom
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click Camera >Digital Zoom.
4. In the Digital Zoom list, select Night, Day or the zoom factor x2 x3 x4 x5
x6 x7 x8.
5. Click ü.
Adjusting the IR
With the IR cut filter, the Camera can still catch clear image at night time or in
low light conditions.
► To adjust the IR
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click Camera >IRFunction.
4. In the IRFunction list, select Auto, On, Off, Light Sensor, Light On, Light
Off or Smart.
Note
Light Sensor, Light On, Light Off are only available on cameras with a built-
in IR LED module.
5. Click ü.
Adjusting the Digital Zoom
32 © 2014 Verint Systems Inc. All Rights Reserved Worldwide.

Verint nextiva V4320 series Specifications

General

Brand	Verint
Model	nextiva V4320 series
Category	IP Camera
Language	English