Verint nextiva V4320 series User Manual

Configuring Local Recording
In the Recording setting page, you can specify the recording schedule that fits
the present surveillance requirement.
► To configure local recording
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click System > Recording.
4. From the Recording Schedule select one of the following: Disable,
Always or Only during time frame.
5. If you select Only during time frame, select the days to record, the Start
time and the duration of the recording.
6. Click Save.
Configuring a Schedule
This function allows the users to setup schedules for Alarm Switch, Motion
Detection and Network Failure Detection. You can create up to 10 sets of
time frames in the time frame list.
► To configure a schedule
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click System > Schedule.
4. For each set, select the days to record, the Start time and the duration of
the recording.
5. Click Save.
Configuring Local Recording
51 © 2014 Verint Systems Inc. All Rights Reserved Worldwide.

Verint nextiva V4320 series Specifications

General

Brand	Verint
Model	nextiva V4320 series
Category	IP Camera
Language	English