Verint nextiva V4320 series User Manual

Light Sources Color Temperature in degree Kelvin (K)
Candle Flame 1,200 to 1,500
► To configure the white balance
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click Camera >White Balance.
4. Select one of the following:
Auto: The Auto Balance White mode is suitable for environment with light
source having color temperature in the range roughly from 2700 to
7500K.
ATW: ATW Mode (Auto Tracing White Balance) The IPCamera takes out
the signals in a screen in the range from 2500 K to 10000 K.
Manual: You can change the White Balance value manually via specifying
R gain and B gain; the range of R/B gain is from 0 to 255.
Adjusting the Picture Quality
► To adjust the picture quality
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click Camera >Picture Adjustment.
4. In the Brightness list, select a value from 1 to 25. To increase video
brightness, select a bigger number.
5. Click ü.
6. In the Sharpness list, select a value from -15 to 10 to set the image
sharpness.
7. Click ü.
8. In the Contrast list,select a value from -13 to 12.
9. Click ü.
10. In the Saturation list, select a value from -13 to 12.
11. Click ü.
12. In the Hue list, select a value from 1 to 12.
13. Click ü.
Chapter 3: Configuring Video Quality
© 2014 Verint Systems Inc. All Rights Reserved Worldwide. 31

Verint nextiva V4320 series Specifications

General

Brand	Verint
Model	nextiva V4320 series
Category	IP Camera
Language	English