Verint nextiva V4320 series User Manual

Configuring Quality of Service
Quality of Service (QoS) provides differentiated service levels for different
types of traffic packets, which guarantees delivery of priority services
especially when network congestion occurs.
► To configure QoS
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click System >Network >QoS.
4. In the Video DSCP box, type a value from 0 to 63.
5. In the Audio DSCP box, type a value from 0 to 63.
6. In the Management DSCP box, type a value from 0 to 63.
7. Click Save.
Note
To enable this function,the switches and routers in the network must support
QoS.
Configuring SNMP
► To configure SNMP
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click System >Network >SNMP.
4. Select one of the following:
Enable SNMP v1
Enable SNMPv2
5. In the Read Community box, type the name of the community name that
has read-only access to all supported SNMP objects. The default value is
public.
6. In the Write Community box, type the name of the community name that
has read / write access to all supported SNMP objects (except read-only
objects). The default value is write.
7. In the Security Name box, type a security name.
Chapter 4: Advance Configuration
© 2014 Verint Systems Inc. All Rights Reserved Worldwide. 40

Verint nextiva V4320 series Specifications

General

Brand	Verint
Model	nextiva V4320 series
Category	IP Camera
Language	English