Verint nextiva V4320 series User Manual

Setting the Periodical Event
► To set Periodical Event
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click System > Events > Periodical Event.
4. Select On or Off.
5. In the Minimum interval box, type the minimal time interval in seconds.
6. From the Triggered Action section, select the alarm actions to perform.
Choose from the following:
Trigger Action Perform the following
Upload image by
FTP
1. From the FTPAddress list, select the FTPsite.
2. From Pre-trigger buffer list, select the number
of frames.
3. From the Post-trigger buffer list, select the
number of frames.
Upload image by E-
mail
1. From the E-mail Address list, select the e-mail
address.
2. From Pre-trigger buffer list, select the number
of frames.
3. From the Post-trigger buffer list, select the
number of frames.
7. From the File Name section, set the properties of the image file.
8. In the File name box, type a name for the image.
9. Select one of the following:
Add date/time suffix.
Add sequence number suffix (no maximum value).
Add sequence number suffix up to and then start over.
Overwrite.
10. Click Save.
Chapter 4: Advance Configuration
© 2014 Verint Systems Inc. All Rights Reserved Worldwide. 48

Verint nextiva V4320 series Specifications

General

Brand	Verint
Model	nextiva V4320 series
Category	IP Camera
Language	English