Configuring HTTPS
HTTPS provides a secure connections between the IP Camera and web browser
using Secure Socket Layer (SSL) or Transport Layer Security (TLS).
A self-signed certificate or a CA-signed certificate is required to implement
HTTPS.
► To create a self-signed certificate
1. In a web browser, type the IP address of the IP camera in the Address bar,
and then press ENTER.
2. Type the username and password.
3. Click System >Security >HTTPS.
4. Click Create to create and install a self-signed certificate.
1. In the Country box, type the two-letter combination to denote the
country where the certificate will be used. The letter combination must
be according to the ISO 3166 standard. For more information on ISO
3166, visit http://www.iso.org/iso/country_codes.htm.
2. In the State box, type the state or province name.
3. In the Locality box, type the locality name.
4. In the Organization box, type the organization name.
5. In the Organization Unit box, type the organization unit name.
6. In the Common Name box, type the IP address or hostname of the
Edge device.
7. In the Valid days box, type the number of day to keep the certificate
valid.
8. Click OK.
Chapter 4: Advance Configuration
© 2014 Verint Systems Inc. All Rights Reserved Worldwide. 36
To Next Page
Loading...
Need help?
General
