What to do if my VERITAS Claire doesn't operate?
If your VERITAS Sewing Machine doesn't operate, check the following: * Ensure the machine is turned on. * Lower the presser foot lifter. * Connect the power line plug to the electrical outlet.
General| Needle Threader | Yes |
|---|---|
| Twin Needle Capability | Yes |
| Feed Dog Drop | Yes |
| Warranty | 2 years |
| Bobbin | Top Loading |
Instructions on using the sewing table and its accessory box function.
Controls sewing start and stop; speed adjustable via lever.
Enables reverse sewing or reinforcement stitches at low speed.
Secures stitches with automatic locking stitches at the end of a pattern.
Determines if the needle stops high or in the fabric.
Adjusts the sewing speed by sliding the lever left or right.
Enters memory mode to store and recall stitch combinations.
Navigates through stitch patterns or pre-memorized stitch groups.
Deletes wrongly memorized stitches from a group.
Adjusts stitch length using '+' and '-' buttons for desired density.
Modifies stitch width using '+' and '-' buttons for desired pattern.
Cycles through Direct, Patterns I, and Patterns II modes for stitch selection.
Adjusts needle position left/right using stitch width buttons for straight stitches.
Mirrors selected stitches to create a reflection pattern.
Turns the machine's sound alerts on or off.
Selects utility patterns directly using dedicated buttons.
Used for selecting patterns in various modes.
Techniques for sewing sharp corners by pivoting with the needle down.
Methods for smoothly sewing curved seams by adjusting direction.
Modifying stitch length for straight stitches based on fabric and thread.
Controlling the width of zig-zag stitches for various effects.
Modifying the density of zig-zag stitches for different results.
Using a triple reinforcement stitch for stretch and hardwearing seams.
Applying a triple zig-zag for firm fabrics like denim.
Employing the dedicated foot for neat overcasting.
Performing overcasting with the standard all-purpose foot.
Details on different buttonhole stitches for various fabrics and garment types.
Step-by-step guide for selecting and sewing buttonholes.
Techniques for creating buttonholes on stretchy materials using gimp thread.
Step-by-step instructions for sewing centered zippers.
Detailed guide for sewing zippers on the side of a garment.
Setting up the machine by lowering feed dogs and removing the presser foot.
Process for repairing holes or tears using free motion stitching.
Steps for creating designs and filling them with stitches.
Guidance for sewing lettering and monograms.
Using a guide to maintain consistent seam allowances in quilting.
Methods for sewing fabric pieces together with a specific seam allowance.
Techniques for sewing patchwork designs accurately.
Steps for applying decorative fabric shapes using stitching.
Creating decorative scalloped edges on fabric.
Storing and combining multiple stitches or characters in memory.
Adding new stitches or modifying existing ones in memory.
Deleting specific stitches or patterns from the memory.
Retrieving and sewing stored stitch combinations from memory.
Interpreting LCD screen messages and symbols for guidance.
Understanding the indicator for bobbin winding activation.
Understanding different beep signals for operation status and errors.
Alerts when the bobbin winder spindle is not in the correct position.
Instructions for cleaning the machine's exterior and display.
Procedure for cleaning lint and debris from the hook area.
To Next Page
