Appendix C
Client Backup Coverage Utility
The client coverage backup utility can produce three reports that gather various types of information about the clients being
backed up by the server. The reports are:
• System Backup Coverage Report
• Class Hardware/OS Report
• Hosts Report
The File System Backup Coverage Report detects file systems that are not backed up by any class and file systems that are
backed up by more than one class. Currently, this report is only supported for UNIX clients.
The Class Hardware/OS Report displays hardware and operating system information for clients. The Hosts Report indicates
which hosts are in a NetBackup class on the server.
The new check_coverage script can be found in /usr/openv/netbackup/bin/goodies.
Refer to the example reports below.
File System Backup Coverage Report (UNIX only)
----------------------------------------------
Key: * - Class is not active
UNCOVERED - Mount Point not covered by an active class
MULTIPLE - Mount Point covered by multiple active classes
CLIENT: honeypot
Mount Point Device Backed Up By Class Notes
----------- ------ ------------------ -----
/ /dev/dsk/c1t0d0s0 pooh
/acsls /dev/dsk/c1t2d0s0 UNCOVERED
/export/home /dev/dsk/c1t1d0s0 pooh
/openv /dev/dsk/c1t1d0s1 tigger
/opt /dev/dsk/c1t0d0s5 kanga MULTIPLE
/opt /dev/dsk/c1t0d0s5 roo MULTIPLE
/packages /dev/dsk/c1t2d0s1 UNCOVERED
/test2 /dev/dsk/c1t0d0s7 pooh
/usr /dev/dsk/c1t0d0s6 UNCOVERED
/var /dev/dsk/c1t0d0s1 *piglet UNCOVERED
Class Hardware/OS Report
------------------------
Key: * - Class is not active
CLIENT - hostname (uname information)
VERSION - NetBackup version running on the client
CLIENT: honeypot (sun4u/SunOS 5.6 Generic)
VERSION: NetBackup-Solaris2.6 3.1GA
Class Name Hardware/OS
----------------------
www.veritas.com Page
53
VERITAS NetBackup Release 3.4 Technical Overview
To Next Page
Loading...
