VERITAS Rachel User Manual

29
Blind Hem
Secure the bottom of skirts and pants with a blind hem, this stitch will sew without
stitches showed on the right side of the fabric.
Blind hem for stretch fabrics.
Blindhemforrmfabrics.
1. Foldthefabricasillustratedwiththeleftsideuppermost.
2. Placethereversedfabricunderthepresserfoot.Turnthehandwheel(20)forwardsby
hand until the needle is fully to the left. It should just pierce the fold of the fabric. If it does
not,adjustthestitchwidthaccordingly.3/4.Adjusttheguide(3)byturningthedial(4)so
that the guide just rests against the fold. Sew slowly and guide the fabric carefully so that
itspositiondoesnotchangeinrelationtotheguide(3).
Blind Hem:
Turnupthehem tothedesired widthandpress.Foldback(asshowninFig.1)againstthe
rightsideofthefabricwiththetopedgeofthehemextendingabout7mm(1/4")totheright
side of the folded fabric.
Start to sew slowly on the fold, making sure the needle touches slightly the folded top to catch
oneortwofabricthreads.(2)
Unfold the fabric when hemming is completed and press.

VERITAS Rachel Specifications

General

Brand	VERITAS
Model	Rachel
Category	Sewing Machine
Language	English