Installation
Secure
Note
Open and remove the desiccant
pack from its outer pouch.
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
Peel the backing from the double-sided
tape on the desiccant pack.
Place the pack directly on
to the “Attach desiccant
here” text on the interior
camera shell.
To secure the camera, align the top shell
security holes with the baseplate and
place the top shell back into its original
position. Tighten the security screws using
the provided T10 Security Torx screwdriver.
11
To Next Page
Loading...
