To Next PageTo Next Page
Need help?Do you have a question about the Vermont Castings Dauntless FlexBurn and is the answer not in the manual?
General| Type | Wood Stove |
|---|---|
| Fuel Type | Wood |
| EPA Certified | Yes |
| Door Material | Cast Iron |
| Burn Time | Up to 8 hours |
| Flue Size | 6 inches |
Details the appliance's certified model, laboratory, report number, type, and standards.
Technical specifications including EPA report, certified emissions, tested efficiency, and output ratings.
Requirements for USA mobile home installations, including room restrictions and structural integrity.
Information on the appliance's ceramic glass type and guidelines for replacement.
Lists materials that will not ignite or burn, important for installation safety.
Defines materials classified as combustible, including examples like wood and drywall.
California-specific warning about chemicals emitted by the product and their health effects.
Key factors for planning installation, including safety, traffic flow, and chimney requirements.
Essential fire safety measures like smoke detectors, extinguishers, and evacuation plans.
Explains risks of negative air pressure and its common causes like exhaust fans.
Lists the necessary tools and building supplies for the installation process.
Instructions for inspecting the appliance and its parts for damage before installation.
A comprehensive checklist for installers to verify all installation steps and requirements are met.
Provides detailed physical dimensions and measurements of the wood stove via diagrams.
Specifies the necessary non-combustible floor protection and its required extensions around the appliance.
Details minimum clearance distances to combustible materials for various installation configurations.
Guidelines for installing the appliance within a fireplace, including mantel clearances.
Recommendations for optimal appliance and chimney placement for performance and draft.
Critical requirements for the chimney cap and termination point to ensure safety and proper function.
Safety requirements for chimney termination relative to rooflines, covering pitched and flat roofs.
Discusses factors affecting draft, including chimney type, height, and home environment.
Describes essential components for venting, such as chimney connectors and thimbles.
Outlines requirements for prefabricated metal chimneys, including listing standards.
Details site-constructed thimble requirements for masonry chimney installation.
Instructions for installing chimney connectors, including single wall and factory-built types.
Instructions for safely removing the wood stove unit from its shipping brackets.
Steps for assembling the stove, including handle installation and leg leveling.
Advice on detector placement and general safety tips for appliance operation.
Guide on how to reverse the flue collar for top or rear venting installations.
Details the process and requirements for installing an outside air source for combustion.
