Vermont Castings KHLDV400

Questions and Answers

A
Andrew GarciaAug 10, 2025
Why is the blower not working on my Vermont Castings KHLDV400?
- S
  Sally LewisAug 10, 2025
  If the blower on your Vermont Castings Indoor Fireplace isn't turning on after the fireplace is started, it could be that the blower setting is off. Try pressing the FAN key to select your desired fan speed. Alternatively, you may need to press and hold the FAN key to set your preferred ON/OFF delays in minutes.
O
Omar LyonsAug 15, 2025
How to adjust blower delay setting on Vermont Castings KHLDV400 Indoor Fireplace?
- S
  Sherri SmithAug 15, 2025
  If the blower delay setting on your Vermont Castings Indoor Fireplace is set too high, press and hold the FAN key to set the desired ON/OFF delays. These delays can be adjusted in minutes.
A
adamsmithAug 20, 2025
How to fix the battery icon on my Vermont Castings Indoor Fireplace transmitter?
- L
  Lisa GonzalezAug 20, 2025
  If the LCD display of your Vermont Castings Indoor Fireplace transmitter shows a battery icon, it likely means the battery is low. You should replace the batteries, ideally every 6 months. Also, ensure the batteries are installed correctly or simply try replacing them. You may also need to reset the transmitter.
D
davidrobertsonAug 25, 2025
Why is the LCD display blank on my Vermont Castings Indoor Fireplace?
- R
  Richard ManningAug 26, 2025
  If the LCD display on your Vermont Castings Indoor Fireplace is blank, the batteries might be low. Replace them, and consider changing them every 6 months. Also, check that the batteries are correctly installed, or try replacing them. If problems persist, you may need to reset the transmitter.
R
Rodney AyalaAug 30, 2025
What to do if my Vermont Castings KHLDV400 Indoor Fireplace LCD display shows funny characters?
- R
  Richard AliAug 30, 2025
  If the LCD display on your Vermont Castings Indoor Fireplace shows a strange or 'funny' display, it is likely due to low batteries. Replace the batteries, and consider doing so every 6 months. You should also check the battery installation or try replacing them. If the issue continues, try resetting the transmitter.
T
Theresa MillerSep 4, 2025
What to do if my Vermont Castings KHLDV400 Indoor Fireplace transmitter shows HI?
- J
  John LyonsSep 5, 2025
  If the transmitter for your Vermont Castings Indoor Fireplace measures a temperature exceeding 99 degrees Fahrenheit and displays “HI” on the LCD, move the transmitter to a cooler location. Wait for the temperature to drop below 99 degrees.