To Next Page
A
Angela MillsAug 10, 2025
Why Vermont Castings VCS3506BI Grill burner will not light?
- HhendersonbethAug 10, 2025
Several factors can prevent your Vermont Castings Grill burner from lighting. First, ensure the gas supply is turned on. Second, check the propane level by weighing the cylinder; a standard 20 lb cylinder weighs about 19 lb empty and 39 lb when 80% full. Third, inspect the venturi tubes for blockages and clean with a venturi brush if needed. Fourth, check the alignment of the gas valve to the venturi tubes, reinserting the gas injector if necessary. Finally, confirm the propane hose and regulator are correctly attached and tightened to the cylinder valve.
General
