Main Menu
EPMe-42 BIOS Reference Manual 5
Flow Control
Option Default: 00000000
00000000 = None
00000001 = RTS/CTS
00000002 = XON/XOFF
Option Description: Sets the flow control method for UCR.
[None] - No flow control.
RTS/CTS - Hardware flow control.
[XON/XOFF] - Software flow control.
Continue C.R. after POST
Option Default: 01
00 = Disabled
01 = Enabled
Option Description: Enables Console Redirection after the OS has been loaded.
Allow Hotkey in S4 resume
Option Default: 01
00 = Disabled
01 = Enabled
Option Description: Enable hotkey detection when the system is resuming from Hibernate
state
UEFI Boot
Option Default: 01
00 = Disabled
01 = Enabled
Option Description: Enables the UEFI boot. If bootable media support both UEFI and Legacy
boot, then the BIOS will choose UEFI unless this option is disabled.
To Next Page
Loading...