Main Menu
EPMe-42 BIOS Reference Manual 3
CSM Support
Option Default: 01
00 = No
01 = Yes
Option Description: Compatibility Support Module that provides backward compatibility
services for legacy BIOS services like int10/int13, dependent on OS.
Quick Boot
Option Default: 00
00 = Disabled
01 = Enabled
Option Description: This enables or disables quick boot.
Diagnostic Splash Screen
Option Default: 00
00 = Disabled
01 = Enabled
Option Description: If you select 'Enabled' the diagnostic, splash screen always displays
during boot. If you select 'Disabled' the diagnostic splash screen does not display unless you
press HOTKEY during boot.
Diagnostic Summary Screen
Option Default: 00
00 = Disabled
01 = Enabled
Option Description: Displays the diagnostic summary screen during boot.
BIOS Level USB
Option Default: 01
00 = Disabled
01 = Enabled
Option Description: This option enables or disables all BIOS support for USB in order to
reduce boot time. Note that this will prevent using a USB keyboard in setup or a USB
biometric scanner such as a finger print reader to control access to setup, but does not
prevent the operating system from supporting such hardware.
To Next Page
Loading...