Advanced Menu
EPMe-42 BIOS Reference Manual 60
DIMM Alert
Option Default: 00
00 = Disabled
01 = Enabled
Option Help: DIMM Alert pin enable
CPU Temp
Option Default: 48
Minimum = 01
Maximum = 6E
Step = 01
Option Help: Help on CPU Temperature
CPU Fan Speed
Option Default: 41
Minimum = 01
Maximum = 64
Step = 01
Option Help: Fan speed that EC will use if OS is hung
VersaLogic Features
Mini Card Mode
Option Default: 02
00 = Pin 43 mSATA Detect
01 = Pin 51 mSATA Detect
02 = Pin 43 or 51 mSATA Detect
03 = Force PCIe Mini Card Mode
04 = Force mSATA SSD Mode
Option Help: The Mini Card slot can support either a PCIe Mini Card or an mSATA
module. The mSATA specifications states that Pin 51 on the connector can be used to
automatically detect an mSATA module. But some modules also use Pin 43 due to
conflicts on Pin 51. Almost all modules will be correctly detected by using the setting of
Pin 43 or Pin 51 mSATA Detect, but there may be cases on older or non-standard
modules where more specific settings are required (including forcing the slot to always be
a PCIe Mini Card or an mSATA module).
To Next Page
Loading...
