Advanced Menu
EPMe-42 BIOS Reference Manual 34
Spin Up Device
Option Default: 00
00 = Disabled
01 = Enabled
Option Help: If enabled for any of ports Staggerred Spin Up will be performed and only
the drives which have this option enabled will spin up at boot. Otherwise all drives
spin up at boot.
SATA Device Type
Option Default: 00
00 = Hard Disk Drive
01 = Solid State Drive
Option Help: Identify the SATA port is connected to Solid State Drive or Hard Disk
Drive
USB Configuration
Port Disable Override
Option Default: 00
00 = Disable
01 = Select Per-Pin
Option Help: Selectively Enable/Disable the corresponding USB port from reporting a
Device Connection to the controller.
USB SS Physical Connector #0-5
Option Default: 01
00 = Disabled
01 = Enabled
Option Help: Enable/Disable this USB Physical Connector (physical port). Once
disabled, any USB devices plug into the connector will not be detected by BIOS or
OS.
To Next Page
Loading...
