Advanced Menu
EPMe-42 BIOS Reference Manual 16
CState Pre-Wake
Option Default: 01
00 = Disabled
01 = Enabled
Option Help: Disable - Sets bit 30 of POWER_CTL MSR(0x1FC) to 1 to disable the
Cstate Pre-Wake
Package C State Limit
Option Default: FF
FF = Auto
FE = Cpu Default
08 = C10
07 = C9
06 = C8
05 = C7S
04 = C7
03 = C6
02 = C3
01 = C2
00 = C0/C1
Option Help: Maximum Package C State Limit Setting. Cpu Default: Leaves to Factory
default value.Auto: Initializes to deepest available Package C State Limit.
Thermal Monitor
Option Default: 01
00 = Disabled
01 = Enabled
Option Help: Enable/Disable Thermal Monitor
GT - Power Management Control
RC6(Render Standby)
Option Default: 01
01 = Enabled
00 = Disabled
Option Help: Check to enable render standby support.
To Next Page
Loading...
