Advanced Menu
EPMe-42 BIOS Reference Manual 25
Active LFP
Option Default: 03
00 = No eDP
03 = eDP Port-A
Option Help: Select the Active LFP Configuration.
No LVDS:VBIOS does not enable LVDS.
Int-LVDS:VBIOS enables LVDS driver by Integrated encoder.
SDVO LVDS:VBIOS enables LVDS driver by SDVO encoder.
eDP Port-A:LFP Driven by Int-DisplayPort encoder from Port-A.
eDP Port-D:LFP Driven by Int-DisplayPort encoder from Port-D(through PCH).
Panel Color Depth
Option Default: 00
00 = 18 Bit
01 = 24 Bit
Option Help: Select the LFP Panel Color Depth
Backlight Brightness
Option Default: FF
Minimum = 00
Maximum = FF
Step = 00
Option Help: Set VBIOS Brightness.
Range : 0-255.
VT-d
Option Default: 01
00 = Disabled
01 = Enabled
Option Help: VT-d capability
To Next Page
Loading...
