Advanced Menu
EPMe-42 BIOS Reference Manual 42
EFI Network
Option Default: 00
01 = Enabled
00 = Disabled
Option Help: Enable/Disable EFI Network support for onboard LAN.
PXE ROM
Option Default: 01
01 = Enabled
00 = Disabled
Option Help: Enable/Disable PXE Option ROM execution.
CLKRUN# logic
Option Default: 00
00 = Disabled
01 = Enabled
Option Help: Enable the CLKRUN# logic to stop the PCI clocks.
Serial IRQ Mode
Option Default: 01
00 = Quiet
01 = Continuous
Option Help: Configure Serial IRQ Mode.
State After G3
Option Default: 00
00 = S0 State
01 = S5 State
Option Help: Specify what state to go to when power is re-applied after a power failure
(G3 state).
To Next Page
Loading...
