Attaching External AM or FM Antennas
Vers 1.5R is equipped with internal AM &
FM antennas for normal use. If improved
radio reception is desired, fi rst slide the
Antenna switch on the bottom from
Internal to External (1) and attach the
appropriate antenna cable to the correct
connector; FM (2), AM (3).
Make sure the wire for either antenna is
fully extended for best performance.
Reception may need to be tuned by adjusting the physical position of
the wire.
If no external antennas are attached, slide the antenna switch to
Note:
the Internal position.
Adjusting Brightness of the LCD Display
The brightness of the display adjusted by pressing to toggle
between High-Medium-Low setting.
1
2
3
To Next Page
Loading...