Do you have a question about the Vertex Standard VX-210AU and is the answer not in the manual?
Brand | Vertex Standard |
---|---|
Model | VX-210AU |
Category | Transceiver |
Language | English |
Overview of the Vertex VX-210AU UHF transceiver.
Details the physical controls and indicators of the transceiver.
Covers installation, removal, and handling of the battery pack.
Guides users through initial setup and basic operational steps.
Explains the programmable ACC button assignments and usage.
Describes functions like Monitor, Squelch OFF, Low Power, Scan, Follow-Me Scan, Dual Watch.
Covers Talk Around, Call/Reset, Speed Dial, TX Save Off, ACC 1, ACC 2.
Lists available accessories and optional units for the transceiver.
Details the RF signal flow from antenna to audio output.
Explains the squelch circuitry and its operation.
Describes the audio signal path during transmission.
Explains the mechanism for controlling transmit power output.
Covers features that prevent transmission and reduce unwanted emissions.
Describes the Phase-Locked Loop circuitry for frequency generation.
Details how the PTT switch activates the transmit mode.
Lists necessary tools and equipment for alignment.
Details the voltage adjustment for the PLL Varactor Control.
Covers alignment of PLL reference frequency, output power, and modulation.
Details alignment for sensitivity and RSSI.
Provides the detailed circuit schematic for the main unit.
Illustrates component placement on the main unit board.
A comprehensive list of all components used in the Main Unit.
Shows the circuit diagram for the SW unit.
Lists the components for the SW unit.
Details the circuit diagram, parts layout, and list for the VTP-50 VX-Trunk Unit.
Provides circuit diagram, parts layout, and list for the FVP-25 unit.