EasyManuals Logo

Vertex Standard VXR-7000 Operating Manual

Vertex Standard VXR-7000
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
VXR-7000 FM REPEATER OPERATING MANUAL16
Specifications
General
Frequency Range: VXR-7000V 136 ~ 150 MHz (A) or 150 ~ 174 MHz (C)
VXR-7000U 400 ~ 430 MHz (A), 450 ~ 480 MHz (D), or 480 ~ 512 MHz (F)
Number of Channels: 16
Channel Spacing: 12.5/25 kHz
Frequency Stability: VXR-7000V ±2.5 ppm
VXR-7000U ±1.5 ppm
Antenna Impedance: 50 (N-Type)
Tx Activation System: Carrier-operated, CTCSS tone operated, DCS operated, or remote control
Power Requirements: 115/230 V AC ±10%, 50/60 Hz or 13.8 VDC
Ambient Temperature Range: –30 °C ~ +60 °C
Dimensions (w/o knobs): 325 x 115 x 391.5 mm (12.8 x 4.5 x 15.4 inches)
Weight (approx.): 10 kg (22 lbs.)
Receiver
Receiver Type: Double-conversion Superheterodyne
Sensitivity: VXR-7000V 0.25 µV for 12 dB SINAD, 0.35 µV for 20 dB NQ
VXR-7000U 0.3 µV for 12 dB SINAD, 0.4 µV for 20 dB NQ
Selectivity: 80 dB
Intermodulation: VXR-7000V 80 dB
VXR-7000U 85 dB
Spurious & Image Rejection: VXR-7000V 95 dB
VXR-7000U 85 dB
Audio Output: 4 W @ 4
Transmitter
RF Output: 10 ~ 50 W (Adjustable)
Duty Cycle: 100 %
Maximum Deviation: ±5.0 kHz (25 kHz spacing), ±2.5 kHz (12.5 kHz spacing)
Modulation Type: 16K0F3E/11K0F3E
Audio Distortion: Less than 2.5 % @ 1 kHz
Spurious Emissions: VXR-7000V Better than 80 dB below carrier
VXR-7000U Better than 75 dB below carrier
Specifications are subject to change without notice or obligation.

Other manuals for Vertex Standard VXR-7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vertex Standard VXR-7000 and is the answer not in the manual?

Vertex Standard VXR-7000 Specifications

General IconGeneral
BrandVertex Standard
ModelVXR-7000
CategoryRepeater
LanguageEnglish

Related product manuals