PWC – 450
PureWaterCooler
Copyright 2011 Vertex Water Products
Completely draining the tanks is required when
shipping the cooler or when one the of the tanks
needs replacing. This procedure will allow you to
remove all the water from the cooler.
11.1 Hot and Cold Tank Drain: Rotate drain caps
until caps are able to be pulled off of the drain
port manifold. Remove drain caps. Water will
pour from the ports.
11.2 Drain any remaining water in the system by
pressing the hot and cold dispense buttons.
11.3 Replace Drain Cap(s).
11. Draining Cooler Tanks
To Next Page
Loading...
Need help?
General
