Vertex PWC-450 F User Manual

PWC – 450
PureWaterCooler
Copyright 2011 Vertex Water Products
14. Trouble Shooting
(Water dispenses from spigot but is not cold)
Possible causes Solution .
1. Power switch not on Make sure cold power switch on
the back panel is on.
2. Adjust temperature control The thermostat temperature control
adjustment is located on the back
of the cooler. (see section 9)
3. All cold water has been used Cooler needs time to recover.
wait 10-15 minutes until water cools
Water not cold from cold tank

Vertex PWC-450 F Specifications

General

Brand	Vertex
Model	PWC-450 F
Category	Water Dispenser
Language	English