To Next Page
J
Jason JohnsonSep 6, 2025
Why does my Vertex T22.1 Treadmill show E01?
- KKimberly PruittSep 6, 2025
Error code E01 indicates that the voltage of the frequency converter is low. Replace the filter, high inductance, and frequency converter.
Why does my Vertex T22.1 Treadmill show E01?
Error code E01 indicates that the voltage of the frequency converter is low. Replace the filter, high inductance, and frequency converter.
What to do if my Vertex T22.1 electronic meter is not set with power supply?
If the electronic meter isn't getting power, there could be several reasons. First, ensure the power switch is turned on. If the indicator light is off, use an ammeter to check if the socket has power. It's also possible the frequency converter isn't inputting DC 12V power, in which case it should be replaced. A faulty control line could also be the cause, requiring replacement. Finally, the electronic meter itself might be faulty.
What does E5 mean on Vertex T22.1 Treadmill?
Error code E5 indicates that the key is abnormal. Replace the electronic meter.
What does E37 mean on my Vertex Treadmill?
Error E37 indicates the frequency converter displays emergency stop. Replace the frequency converter, control line, and electronic meter.
What does E0A mean on Vertex T22.1?
Error E0A indicates that the overload of frequency converter motor is abnormal. Replace the motor or frequency converter.
What does E29 mean on my Vertex Treadmill and what should I do?
Error E29 means the frequency converter displays high temperature. Add lubricating oil in the running machine and replace the frequency converter.
What does E0B mean on my Vertex T22.1 Treadmill?
Error E0B indicates the overload of frequency converter is abnormal. Add lubricating oil in the running machine and replace the frequency converter.
What does E06 mean on my Vertex Treadmill display?
Error E06 indicates the frequency converter has overcurrent. Replace the braking resistance of the frequency converter to resolve this.
What to do if my Vertex T22.1 Treadmill displays E09?
Error code E09 means the frequency converter is overheating. You should add lubricating oil to the running machine and replace the frequency converter.
What does E04 mean on my Vertex Treadmill and how can I fix it?
Error code E04 indicates that the frequency converter outputs overcurrent. To fix this, add lubricating oil to the running machine and replace the frequency converter.
Essential safety precautions for operating the treadmill, covering electrical and physical hazards.
Specifies the power voltage and frequency requirements for the treadmill.
Step-by-step instructions for assembling the treadmill components.
Explains the benefits of stable heart rate exercise and its modes.
Details on how to use hand grip sensors and chest belt monitors for pulse detection.
Lists error codes and corresponding causes, corrective measures, and remarks for troubleshooting.
General