Vertex VXR-5000 - Timer; Time-Out Timer; Hang-Timer

VXR-5000
Ch annel Editor Window
Frequency
Channel data (TX and RX) must be entered
individually for channels 1
~ 8, as shown
above. Channels are enabled/disabled by
toggling the SPACE bar. Frequencies are en-
tered using
the numeric keypad or top-row
keys.
Up to eight digits can be entered and
displayed, however, frequencies will be
rounded to the nearest channel-step (as set in
the
environment window). Confirm that the
frequencies entered are
within the operating
range of the repeater version-type
you are
programming.
Timer
Time-Out Timer, Hang-Timer and Penalty-
Timer settings for
both repeater and remote-
base operation can be edited in this
menu(shown below). These affect overall sys-
tem operation,
and therefore should be con-
figured according to
user requirements.
• T ime-Out Timer - this selects a maximum
time period for continuous transmission
(1 ~ 60 mins.), or is disabled by pressing
the SPACE bar.
• Hang-Timer - this controls how long the
repeater will remain keyed after a trans-
mitting station's carrier drops (stops
transmitting). Hang-Time can be adjusted
Timer Settings Win dow
3-6