Vertex VXR-5000 - Specifications

V XR -5000
General
Freq. Range (MHz):
Max. Ch. Spread:
No. of Channels:
Ch. Separation:
Frequency Stability:
Emission Type:
Tx Activation System:
Power Requirements:
Input Power:
8perating Temp.:
Case Size:
Weight:
Trans mitt er
Specifications
vers (A) 134 -147 (B) 146 - 160 (BS1) 156 - 168 (~) 164 - 175
2
lv1Hz (w / 0 degradation)
1-8
12.5 kHz / 20 kHz / 25 kHz
±2ppm
F3E
carrier-operated, CTCSS tone operated, or remote control
~00/117 /220/234 V AC (50/60 Hz), 13.8 VDC
200 W AC (25 watts RF output), 30 W standby
6.0 A DC (25 watts RF output), 500 rnA standby
-30 ~ +60 C
375 x 275 x 110 mm (WHD)
12
kg
RF Power ~utput: 25 Watts, continuous-duty
Maximum Deviation: ± 2.5 kHz (12.5 kHz spacing)
± 4.0 k Hz (20 kHz spacing)
±
5.0 kHz (25 kHz spacing)
Audio Response: + 6 dB/octave (+1.0/-3.0 dB)
A udio Distortion: <S %
FM Noise Ratio: 40dB
Spurious Emissions: -80 d Bc
Receiver
Receiver Type:
Sensitivity:
1st
& 2nd IF:
Adj. ~h. Selectivity:
Intermodulation:
Spurious Response:
AF Response:
Int erface
Double-conversion, Superheterodyne
0 .5 :.tV (0 dB~) for 12 dB SI NAD
21.6
MHz (1st I.F.) 455 kHz (2nd I.F. )
70 dB
70 dB
75 dB
750 Ils de-emphasis
Line
Port: 600-Q 4-wire (E+M signaling)
Accessory Port: 25-pin (DB-25F type)
Specifications subject to change without notice or obligation.
I nstruction Ma nual
1 -3