Need help?Do you have a question about the Vertiv Liebert GXT5-6000IRT5UXLE and is the answer not in the manual?
General| Model | GXT5-6000IRT5UXLE |
|---|---|
| Product Type | UPS |
| Topology | Double Conversion Online |
| Power Rating | 6000VA |
| Output Power Capacity | 6000VA / 6000W |
| Input Voltage | 200-240 VAC |
| Output Voltage Regulation | +/- 1% |
| Output Power Factor | 1.0 |
| Output Waveform | Sinewave |
| Typical Recharge Time | 3 hours to 90% |
| Form Factor | Rack/Tower |
| Rack Size | 5U |
| Humidity | 0-95% non-condensing |
| Input Frequency | 40-70 Hz |
| Output Frequency | 50/60 Hz |
| Battery Type | Sealed Lead-Acid (SLA) |
| Runtime | Varies with load |
| Communication Ports | USB, RS-232 |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -15°C to 45°C (5°F to 113°F) |
| Weight | 132.28 lbs (60 kg) |
Lists available models and power ratings, detailing key product features.
Details the location and types of internal battery packs used in the UPS.
Explains the core internal components and how the UPS operates.
Describes normal operation where UPS provides stabilized power using rectifier and inverter.
Explains bypass mode where UPS supplies power from bypass source (utility power).
Guides the user through the process of installing the UPS unit.
Details on making hardwired electrical connections for UPS input and output.
Procedure for connecting a REPO switch to shut down the UPS in emergencies.
Steps for the initial start-up and parameter setup of a parallel UPS system.
Procedure for commissioning and verifying a parallel UPS system's operation.
Procedure for starting up the UPS unit safely.
Steps for completely shutting down the UPS unit.
How the REPO function works to turn off the UPS in emergency conditions.
Explains how to access and modify UPS settings via the menu.
Procedure for changing the UPS display and operation settings password.
Detailed procedure for safely replacing the UPS internal battery packs.
Steps to update firmware using the RDU101 communication card.
Procedure to update DSP firmware using the RDU101 communication card.
Procedure to update firmware using Command Line Interface (CLI).
To Next Page
