Need help?Do you have a question about the Vertiv Liebert GXT5-6000IRT5UXLN and is the answer not in the manual?
General| Product Type | UPS |
|---|---|
| Power Rating | 6000 VA |
| Topology | Double Conversion Online |
| Frequency | 50/60 Hz |
| Form Factor | Rack/Tower |
| Rack Height | 5U |
| Nominal Output Voltage | 230 V |
| Nominal Input Voltage | 230 V |
| Output Voltage THD | < 5% |
| Battery Type | Sealed Lead-Acid (SLA) |
| Battery Recharge Time | 3 hours to 90% |
| Battery Runtime | Varies based on load |
| Communication Ports | USB, RS-232 |
| SNMP Support | Yes |
| Operating Temperature | 0 to 40 °C |
| Humidity | 0 to 95% (non-condensing) |
| Audible Noise | < 55 dBA at 1 meter |
| Output Power Capacity | 6000 VA / 5400 W |
Details features and available models of the GXT5 UPS, including power ratings.
Explains the core internal components of the UPS and its basic operating principles.
Details the different operational states and modes of the GXT5 UPS, such as Normal, Bypass, and Battery modes.
Guidelines for preparing the installation environment and site for the UPS.
Instructions for installing the UPS unit in either a tower or rack configuration.
Provides instructions for connecting external battery cabinets (EBCs) to the UPS for extended battery life.
Covers the procedures for making hardwired input and output electrical connections to the UPS.
Covers the requirements and procedures for configuring and installing GXT5 UPS units in a parallel system.
Step-by-step guide for safely replacing the internal battery packs of the UPS.
Information on the UPS firmware components and where to find update files.
Provides a table to identify UPS problems, causes, and solutions.
To Next Page
