Need help?Do you have a question about the Vertiv Liebert GXT5-10KIRT5UXLE and is the answer not in the manual?
General| Model | Liebert GXT5-10KIRT5UXLE |
|---|---|
| Product Type | UPS |
| Topology | Double Conversion Online |
| Capacity | 10 kVA / 10 kW |
| Output Voltage | 200/208/220/230/240 VAC |
| Rack Size | 5U |
| Output Power Factor | 1.0 |
| Input Voltage | 200/208/220/230/240 VAC |
| Output Voltage THD | < 3% |
| Input Frequency | 40 Hz to 70 Hz |
| Output Frequency | 50 Hz / 60 Hz (Selectable) |
| Form Factor | Rack/Tower |
| Battery Type | Sealed Lead-Acid (SLA) |
| Communication Ports | USB, RS-232 |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
| Humidity | 0-95% (non-condensing) |
Step-by-step guide to safely start the UPS after installation and commissioning.
Caution against disconnecting parallel system cables while operating.
Caution to ensure correct cabling before powering on an added/replacement UPS.
Critical warning about electric shock and short-circuit hazards when working with batteries.
Warning about explosion risk and hazards from battery disposal or damage.
Step-by-step guide to update firmware using an RDU101 communication card.
To Next Page
