Need help?Do you have a question about the Vertiv Liebert GXT5-6000MVRT4UXLN and is the answer not in the manual?
General| Power Rating | 6000 VA |
|---|---|
| Topology | Double Conversion |
| Input Voltage | 200-240 VAC |
| Output Voltage | 200/208/220/230/240 VAC |
| Output Voltage Regulation | ±1% |
| Transfer Time | 0 ms |
| Relative Humidity | 0% to 95% (non-condensing) |
| Form Factor | Rack/Tower |
| Product Type | UPS |
| Input Frequency | 40 Hz to 70 Hz |
| Output Frequency | 50/60 Hz +/- 0.1% |
| Battery Type | Sealed Lead-Acid |
| Typical Recharge Time | 4 hours to 90% |
| Communication Ports | USB, RS-232 |
| Operating Temperature | 0°C to 40°C |
| Output Power Capacity | 6000 W |
| Audible Noise | <55 dB at 1 meter |
Instructions for installing the UPS in tower or rack configurations.
Steps for connecting optional external battery cabinets for extended run time.
Guidelines for making hard-wire input and output electrical connections.
Specifications and procedures for making terminal block electrical connections.
Details and procedures for various UPS communication port connections.
Requirements and procedures for configuring UPS units in a parallel system.
Step-by-step guide for powering on the UPS after installation.
Procedures for safely shutting down the UPS completely.
Safety precautions and step-by-step guide for replacing UPS battery packs.
Procedures for updating the UPS firmware.
Guide to identify causes and solutions for common UPS problems.
To Next Page