Vertiv NetSure 8200 Series User Manual

Vertiv | NetSure™ 8200 Series -48 VDC Power System User Manual (UM582140000) | Rev. A
33
5. It is recommended that the current limit point be checked whenever a rectifier is added to or removed
from a bay. Refer to “Checking the NCU Current Limit Point after Adding or Removing a Rectifier” on
page 35.
6. The rectifier being added is assigned by the NCU the lowest available identification number. If desired,
you can change the identification number. See “Configuring the NCU Identification of Rectifiers after
Adding a Rectifier” on page 36.
7. Ensure that there are no local or remote alarms activated on the system.

Vertiv NetSure 8200 Series Specifications

General

Brand	Vertiv
Model	NetSure 8200 Series
Category	Power Supply
Language	English