Vertiv NetSure 801 AG1 User Manual

NetSure 801 AG1 Power Supply System
User Manual
Version
V2.0
Revision date
BOM
December 31, 2017
31013243
Vertiv Tech provides customers with technical support. Users may contact the nearest Vertiv local sales
office or service center.
Copyright © 2017 by Vertiv Tech Co., Ltd.
All rights reserved. The contents in this document are subject to change without notice.
Vertiv Tech Co., Ltd.
Address: Block B2, Nanshan I Park, No.1001 Xueyuan Road, Nanshan District, Shenzhen, 518055,
P.R.China
Homepage: www.vertivco.com
E-mail: overseas.support@vertivco.com

Vertiv NetSure 801 AG1 Specifications

General

Brand	Vertiv
Model	NetSure 801 AG1
Category	Power Supply
Language	English

Summary

Safety Precautions and Hazards

Electrical Safety

Covers hazards and precautions related to electrical safety.

ESD and Short Circuit Safety

Details electrostatic discharge, short circuit risks, and prevention.

Battery Safety Procedures

Covers critical safety measures for battery handling and connection.

1.3 Components

1.3.1 DC Distribution Cabinet

Describes the DC distribution cabinet models and their appearance.

1.3.2 Rectifier Rack

Describes the rectifier cabinet and its components.

Chapter 2 Installation Preparation

2.1 Installation Requirements

Details environmental and layout requirements for equipment installation.

Chapter 3 Installation

3.1 Safety Regulations

Lists safety regulations to be followed during installation.

3.2 Installing Cabinet

Details procedures for installing the cabinet on the floor or supporting rack.

3.3 Connecting Power Cables

3.5 Installing Rectifier And Controller

Chapter 4 Testing

4.1 Testing Notes and Precautions

4.2 Power-On and Initial Tests

4.3 Basic Parameter Configuration

Explains how to set DIP switches and monitoring module parameters.

4.4 Alarm and Operation Status Checks

Chapter 7 Maintenance

7.1 Maintenance Requirements and Tools

Outlines general requirements and tools for system maintenance.

7.2 Routine Maintenance Tasks

7.4 Fault Inspection and Handling

7.5 Emergency Treatment Procedures

Provides emergency measures for faults threatening DC power supply.